Portable Electric Car Charger Type 2 IEC 62196-2 – 3 Pin Plug, Single Phase, 16A, 3.7kW
JT Mobility Type 2 IEC 62196-2 Smart portable chargers allow you to charge on the go from all types of sockets, from the usual socket to the industrial 3-Pin Plug-16A. It has the new generation practical display that shows the charging current, voltage at each phase, power, and temperature. All JT Mobility portable chargers allow you to set the charging current according to the circuit breaker and ensure that the circuit breaker will not trip during charging. All portable chargers are equipped with protective elements to ensure the complete safety of the car and the charger.
Portable Mode 2 charging cable for connection EV to an ordinary domestic socket. Drivers can charge electric cars from a domestic socket in an emergency. Communication between vehicle and charging port is provided via a box connected between the vehicle plug and connector plug called ICCB (In-Cable Control Box).
IP 65 Rated
Non-Flammable Strong Polyamide Material, More Environmentally Friendly and Halogen Free
Recognition of Dangerous Voltage on the Protective Conductor
Power Failure Monitoring
Integrated Vehicle Communication Module (PWM)
Fully compatible with all Type-2 based EV in the market.
Good to Know
Please always use this ode 2 EV charging cable for EV with proper inlet socket. Don't use it for EVs with different inlet types.
The product is only for EV charging. Please don't use it in any other occasions, including hauling, binding and so on.
Don't use it in water.
Do not use the charger if any parts of the charger is damaged.
Do not use this device with an extension cord or an adapter.
The device does not contain any user-serviceable parts.
Please do not disconnect the plugs while the EV charger is charging the vehicle.
This cable has a precise internal structure. Any questions, please contact sales service at the first time.
Mind the risk of electrical shock or burn.
The device does not contain any user-serviceable parts. Please don't take it apart without any professional technical support.
|Approx. Diameter Cable (mm)||10.0 ± 0.50|
|Cable Length||5 Meter|
|Cable Nominal Conductor Size (Sq. mm)||3 Core x 2.5 Sq. mm 1 Core x 0.5 Sq. mm|
|Cable Outer Sheathing||Thermoplastic polyurethane (TPU)|
|Contact Pin||Copper Alloy, Silver or Nickel Plating|
|Contact Resistance||0.5 megohm MAX|
|Flame Retardant Grade||UL94 V-0|
|IC-CPD Enclosure Material||ABS|
|IC-CPD LCD Display||YES|
|IC-CPD Operating Voltage||100-250V|
|IC-CPD Protection Degree||IP 66|
|IC-CPD Rated Current (Max)||16A|
|IC-CPD Standard||IEC 62752|
|Impact Insertion Force:||>300N|
|No Of Phase||Single|
|Operating Temperature||-30C to +65C|
|Plug Protection Degree||IP55 - Mated|
|Plug Type||Type-2 Female|
|Sealing gasket||Rubber or silicon rubber|
|Supply Connector||3 Pin – 16Amp|
|Used at||Vehicle Side|