Menu
Your Cart

Welcome to JT Mobility Pvt. Ltd.

India’s first manufacturer of electric vehicle portable chargers and components

EV Charging Cable Mode-3 Type 2 IEC 62196-2 Male to Type 2 Female Single Phase, 16 Amp, 3.7Kw

EV Charging Cable Mode-3 Type 2 IEC 62196-2 Male to Type 2 Female Single Phase, 16 Amp, 3.7Kw
EV Charging Cable Mode-3 Type 2 IEC 62196-2 Male to Type 2 Female Single Phase, 16 Amp, 3.7Kw
EV Charging Cable Mode-3 Type 2 IEC 62196-2 Male to Type 2 Female Single Phase, 16 Amp, 3.7Kw
EV Charging Cable Mode-3 Type 2 IEC 62196-2 Male to Type 2 Female Single Phase, 16 Amp, 3.7Kw
EV Charging Cable Mode-3 Type 2 IEC 62196-2 Male to Type 2 Female Single Phase, 16 Amp, 3.7Kw

Key Features

Type 2 IEC 62196-2 Male to Type 2 Female, Single Phase, 16 Amp, 3.7Kw, 5 meter.

Plug in/pull out >10000 times.

It is suitable for Type 2 vehicle inlets and connects charging stations.

Meet IEC 62196-2 standard.

Plug Material: Thermoplastic UL94 V-0,

High Quality Cable Material (TPU/TPE)

Rated with IP55 (working condition).

Pin Material: Copper Alloy & Silver Plating

Waterproof Rating suitable for Indoor and Outdoor Charging Safely.

Non-Flammable Strong Polyamide Material

Data Sheet

  • Model: JTCCM3T2T21P1A05-1

EV Charging Cable Mode-3 Type 2 IEC 62196-2 Male to Type 2 IEC 62196-2 Female Single Phase, 16 Amp, up to 3.7Kw, 5 meter

JTCCM3T2T21P1A05-1

 

JT Mobility mode 3 charging cable is a connector cable between the charging station and the electric car. To allow electric cars to be charged using type 2 plugs. This cable works on all charging stations mode 3 according to standards ISO 17409 and IEC 61851. It is compatible with all the charging stations and all EV rechargeable vehicle with type 2 standard. This cable will work safely on all charging stations, even the ones with inferior or superior charging power. This product has a unique integrated design and strong structure which can be used outdoor and in rainy environment. It could also withstand the crushing of a vehicle. This Type 2 (Male) – Type 2 (Female) Cable permits Single phase 16Amps of charge to flow into the electric vehicle. It used to connect vehicle with EVSE Socket (Female) to Electric Vehicle Inlet Socket (Male)

 


Specifications
Coding 680 Ω (between PE and PP)
Connection method Crimp connection, cannot be disconnected
Contact Pin Copper Alloy, Silver Plating
Contact Resistance 0.5m ohm Max
Flame Retardant Grade UL94 V-0
Insulation resistance >1000Mohm (DC500V)
Plug A End Type-2 Female EV Side
Plug B End Type-2 Male EVSE Side
Plug Type Female
Power Contact 3 (L1, N, PE)
Shell material ABS and Thermoplastic Material
Signal Contact 2 (CP, PP)
Temperature Resistance <50K
Type of signal transmission Pulse width modulation
Electrical Properties
Charging current (Max) 16 A
Charging power 3.7 kW
No Of Phase Single
Operating Voltage 100-250V
Rated current Signal Contact 2A
Rated voltage Signal Contact 30 V AC
Type of charging current AC single-phase
Mechanical Properties
Impact Insertion Force >300N
Insertion force < 100 N
Insertion/withdrawal cycles > 10000
Sealing gasket Rubber or silicon rubber
Withdrawal force < 100 N
Standard & Classifications
ETIM EC002897
Standard IEC 62196-2
UNSPSC 39121500
Wiring standard EN 50620
Ambient Properties
Operating temperature -30C to +65C
Protection Degree IP55 (Working Condition)
Cable Properties
Cable diameter 12 mm ±0.4 mm
Cable Length 5 Meter
Cable Outer sheath Material TPE-U
Nominal Conductor Size (Sq. mm) 3 Core x 2.5 Sq. mm 1 Core x 0.5 Sq. mm
Allow All Cookies
We use cookies to collect and analyze information on site performance and usage, to provide social media features and to enhance and customize content and advertisements.