Type-2 Portable Electric Car Vehicle Charger Type 2 IEC 62196-2 - CEE, Single Phase, 32A, 7.3kW

Portable Electric Car Charger Type 2 IEC 62196-2 - CEE, Single Phase, 32A, 7.3kW

JTCCM2T2CE1P1A05-2

JT Mobility Type 2 IEC 62196-2 Smart portable chargers allow you to charge on the go from all types of sockets, from the usual socket to the industrial CEE-32A. It has the new generation practical display that shows the charging current, voltage at each phase, power, and temperature. All JT Mobility portable chargers allow you to set the charging current according to the circuit breaker and ensure that the circuit breaker will not trip during charging. All portable chargers are equipped with protective elements to ensure the complete safety of the car and the charger.

Portable Mode 2 charging cable for connection EV to an ordinary domestic socket. Drivers can charge electric cars from a domestic socket in an emergency. Communication between vehicle and charging port is provided via a box connected between the vehicle plug and connector plug called ICCB (In-Cable Control Box).

Adjustable Current

Customers could adjust different current as their request. Also, the charger which equipped the adaptor could automatically identify different plug types and control the current upper limit to keep safe.

Full Link Temperature Monitoring System

JT Mobility original “full link” temperature control system can protect the temperature of 75 ̊ and cut off the current for 0.2S when temperature over 75 ̊.

Automatically Intelligent Repair

The smart chip is equipped to automatically repair common charging errors. It could also restart the power to protect the device from stopping charging errors. It could also restart the power to protect the device from stopping charge caused by voltage fluctuation.

IP67 Rolling-resistance System

Rugged shell which could resist the rolling and crash of the car. IP66 ensure the perfect work outdoors in any environment including rain and snow.

Temperature Monitoring

Real-time monitor is equipped to detect the temperature of the car-end and the wall-end plugs. Once the temperature is detected above 80 ̊ C, the current will be cut-off immediately. When the temperature returns below 75 ̊ C will resume off.

Battery Protection

Accurate monitoring of PWM signal changes, Effective repair of capacitor units, Maintenance of battery life.

High Compatibility

Fully compatible with all EV in the market.

Key Features

Molded Plug with Temperature Sensor

IP 66 Rated

Non-Flammable Strong Polyamide Material, More Environmentally Friendly and Halogen Free

Recognition of Dangerous Voltage on the Protective Conductor

Protective Conductor Monitoring (PCM)

Power Failure Monitoring

Thermal Monitoring

Integrated Vehicle Communication Module (PWM)