Key Features
60A 80A 125A 200A CCS 2 IEC 62196-3 Male Inlet Socket
IP55 Rated
Unique Integrated Design
Mounted on the side of the vehicle/EVSE.
High strength flame retardant nylon
Pin Material: Copper Alloy & Silver Plating
Better Conductivity and Higher Energy Transmission
Excellent protection performance resistance to vibration,
moisture, dust, and salt spray.
Insulator in flammability UL94 V-0
Comply to IEC 62196 standard.
Nice appearance, hand-held ergonomic design, easy plug
Mechanical life No-load plug in/pull out >10000 times.
Data Sheet
- Model: JTEVS200AC2M
60A 80A 125A 200A CCS 2
IEC 62196-3 Socket DC Fast Charger Combo 2 Inlet Socket male without cable
JTEVS200AC2M
JT
Mobility Combined Charging System (CCS) is based on open and universal
standards for electric vehicles. The CCS combines single-phase with rapid
three-phase charging using alternating current at a maximum of 43 kilowatts
(kW), as well as direct-current charging at a maximum of 200 kW and the future
perspective of up to 350 kW – all in a single system. As a result, it provides
a solution to all necessary charging requirements. The Combo CCS2 charging
connectors are available in 60A to 200A. It’s combined alternating current (AC)
Type 2 charging and direct current (DC) CCS fast charge in one inlet. It is
used at vehicle side.
Specifications | |
Application | Vehicle Charging Inlet for charging with alternating current (AC) and with direct current (DC) |
Charging mode | Mode 2, 3, 4 |
Coding | 4.7 kΩ (between PE and PP) |
Conductive terminal | Cooper alloy pins , sliver plated on surface |
Contact Resistance | 0.5m ohm Max |
Insulation resistance | 2000MΩ (DC1000V) for CCS Type 2 charging connector |
Locking type | Locking in the inserted state with a locking mechanism |
Mechanical Parameter | Tested no-load plug in / plug out > 10000 times life cycle |
Number of Pins | 7 (L1, L2, L3, N, PE, DC+, DC-) |
Signal Contact | 2 (CP, PP) |
Temp. Attachment point | 2 sensors for the DC contacts |
Temp. Sensor type | Pt 1000 |
Temp. Standards/regulations | DIN EN 60751 |
Temperature measurement | DC contacts: 2x PT1000 (DIN EN 60751) |
Temperature Resistance | < 50K |
Type of cover movement | Self-locking |
Type of signal transmission | PWM with modulated Powerline communication in accordance with ISO/IEC 15118 / DIN SPEC 70121 |
Electrical Properties | |
Charging power | 200 kW |
Rated current AC | 32 A AC |
Rated current DC | 250 A DC |
Rated current Signal Contact | 2A |
Rated voltage AC | 480 V AC |
Rated voltage DC | 1000 V DC |
Rated voltage Signal Contact | 30 V AC |
Type of charging current | AC 3-phase |
Mechanical Properties | |
Insertion force | < 100 N |
Insertion/withdrawal cycles | > 10000 |
Operate force | Less than 100N |
Withdrawal force | < 100 N |
Standard & Classifications | |
Charging standard | CCS type 2 |
ETIM | EC002898 |
Standard | IEC 62196-2 & IEC 62196-3 |
UNSPSC | 39121800 |
Ambient Properties | |
IP protection class | IP 55 (Working condition) |
Operating Temperature | -30C to +65C |
Temperature monitoring | AC contacts: PTC chain (DIN˽EN˽60738-1) |
Cable Properties | |
Outer Shell | Thermoplastic material, fire rating UL94-0 |