Key Features
Smart Electric Power Meter
Single Phase 5-60Amp
Measurement of voltage,
bidirectional current, active power, reactive power, apparent power, power
factor, frequency, active energy, reactive energy.
Multi-rate energy statistics, up
to 8 time slots per day, 4 tariffs.
Rated current 5 - 60A.
1 passive optical coupler
collector active pulse outputs.
Wi-Fi communication,
LCD display a variety of power
parameters and information.
Built-in clock and
maintenance-free battery, permanently data saving after power off.
Large-capacity magnetic
retention relay, load on-off control.
Data Sheet
- Model: JTSM1P-01
Wi-Fi Smart Electric Power
Meter Single Phase 5-60Amp
JTSM1P-01
Wifi
electric smart power meters are single phase / three-phase electricity meter
with smart management system, it is a Wi-Fi enable electric meter with high
accuracy up to Class 0.5S, easy to install with din rail mounting. It can measure the voltage, current, power,
power factor, frequency with high reliability, fully comply to the
international standard IEC62053/IEC62055-41/IEC62056-21. DIN rail smart energy
meter is designed with advanced microprocessor and digital signal processing
technology. It integrates comprehensive Single / three phase power measurement,
display, energy accumulation, and network communication. It has strong
anti-interference ability and can still work stably in situations with severe
electromagnetic interference.
Applications:
Energy
efficiency management system.
Internal
energy consumption statistical analysis and charging statistics
Energy
metering, automatic meter reading system.
Intelligent
distribution management system.
Power
consumption Monitoring System
Specifications | |
Altitude | No more than 4000m |
Clock accuracy | <0.5S/D |
Dimension | 108*66*75mm |
Electrostatic discharge immunity | IEC61000-4-2,Level4 |
Frequency | ±0.02Hz(0.01Hz) |
Frequency range | 45-65Hz |
Insulation resistance | >50MΩ |
Electrical Properties | |
Active energy | ±0.5%(0.1kWh) |
Active power | ±0.5%(0.1W) |
Current | ±0.2%(0.01A) |
Electrical fast burst immunity | IEC61000-4-4,Level4 |
Impact voltage | 5kV (Peak),1.2/50us |
Overall power consumption | <5VA |
Power factor | ±0.5%(0.001) |
Power frequency magnetic field immunity | IEC61000-4-8,Level4 |
Power frequency withstand voltage | AC2kV/min~1mA Input-output-power source |
Rated current | 5/10/20/60 A |
Rated voltage | AC 110V/220/230/240 V |
Reactive energy | ±2.0%(0.1kvarh) |
Reactive power | ±2.0%(0.1kvar) |
Starting current | 0.2%Ib |
Surge (impact) immunity | IEC61000-4-5,Level4 |
Voltage | ±0.2%(0.01V) |
Standard & Classifications | |
Protocol | Modbus-RTU |
Ambient Properties | |
IP class | IP51 |
Operating temperature | -25C to +55C |
Relative humidity | 5% - 95% No condensation |
Storage temperature | -30C to +75C |