Key Features
Type 2 IEC 62196-2 Female Inlet Socket for EVSE
IP55 Rate
Unique Integrated Design
Mounted on the side of the vehicle/EVSE.
High strength flame retardant nylon
Pin Material: Copper Alloy & Silver Plating
Better Conductivity and Higher Energy Transmission
Excellent protection performance resistance to vibration, moisture, dust, and salt spray.
Insulator in flammability UL94 V-0
Comply to IEC 62196 standard.
Nice appearance, hand-held ergonomic design, easy plug
Mechanical life No-load plug in/pull out >10000 times.
Data Sheet
- Model: JTEVS32A3PT2F
Single/Three Phase 32A Type 2 IEC 62196-2 Female Inlet Socket for EVSE without Cable
JTEVS32A3PT2F
JT Mobility type 2 inlet socket (female), 32A, 480V, 3-phase. is intended for installation in the charger side for a maximum of 32A. Only to be used in combination with an EVSE (Electric Vehicle Supply Unit) controller. The socket complies a high-quality insulating thermoplastic coating that provides IP55 protection against dust and water ingress from all sides and has a water drainage hole. The socket is ready for 4-point fixing and the screw.
Key Features
IP55 Rated Working Condition
Unique Integrated Design
Self-Cleaning Function on Pins
Mounted on the side of the vehicle.
High strength flame retardant nylon
Pin Material: Copper Alloy Silver Plating
Better Conductivity and Higher Energy Transmission
Excellent protection performance resistance to vibration, moisture, dust, and salt spray.
The socket is equipped with resistance sensors that automatically switch off when the temperature rises above a safe limit.
Insulator in flammability UL94 V-0 (It is equipped with a UL94 V-0 approved fire isolator that stops the spread of fire within 10 seconds)
Type 2 charging socket meet 62196-2:2010 sheet 2-iia
Comply to EN 62196-1: 2014; EN 62196-2:2017; TUV CE Standards.
Universally compatible, high-quality IEC 62196 type 2 ev charging outlet designed for 10,000+ charging cycles
| Specifications | |
| Application | Female socket without Cable (EVSE Side) |
| Charging mode | Mode 3, Case B |
| Color | Black |
| Contact Pin | Copper Alloy, Silver Plating |
| Contact Resistance | 0.5m ohm Max |
| Depth | 87.95 mm |
| Design (charging socket) | Square |
| Flame Retardant Grade | UL94 V-0 |
| Height | 91.71 mm |
| Insulation resistance | >1000Mohm (DC500V) |
| Locking type | Locking in the inserted state with a locking mechanism |
| Material | Thermoplastic, Flame retardant grade UL94-0; |
| Number of Pins | 5 (L1, L2, L3, N, PE) |
| Signal Contact | 2 (CP, PP) |
| Temperature Resistance | <50K |
| Type of cover movement | Self-locking |
| Type of signal transmission | Pulse width modulation (PWM) |
| Width | 75 mm |
| Electrical Properties | |
| Charging current (Max) | max. 32 A |
| Charging power rating | max. 22 kW |
| Rated current | 32A |
| Rated current Signal Contact | 2A |
| Rated voltage | 480 V AC |
| Rated voltage Signal Contact | 30 V AC |
| Type of charging current | AC 3-phase |
| Mechanical Properties | |
| Insertion force | < 100 N |
| Insertion/withdrawal cycles | > 10000 |
| Sealing gasket | Rubber or silicon rubber |
| Withdrawal force | < 100 N |
| Standard & Classifications | |
| Charging standard | Type 2 |
| ETIM | EC002898 |
| Standard | IEC 62196-2 |
| UNSPSC | 39121800 |
| Ambient Properties | |
| Operating temperature | -30C to +65C |
| Protection Degree | IP55 (Working Condition) |
