Key Features
Type
2 IEC 62196-2 Female Single Phase Cable, Three Phase, 16 Amp, 11Kw, 5 meter.
Plug
in/pull out >10000 times.
It
is suitable for Type 2 vehicle inlets and connects charging stations.
Meet
IEC 62196-2 standard.
Plug
Material: Thermoplastic UL94 V-0,
High
Grade TPU/TPE Cable
Rated
with IP55 (working condition).
Pin
Material: Copper Alloy & Silver Plating
Nice
appearance, hand-held ergonomic design, easy plug
Data Sheet
- Model: JTCCM3T23P1A05-1
Mode 3
Tethered Charging Cable Type 2 IEC 62196-2 Female Three Phase 16 Amp 11Kw 5
Meter
JTCCM3T23P1A05-1
JT
Mobility Three Phase / Single Phase 16A/32A Type 2 tethered charging cable is
designed for charging in mode 3, it is suitable for connection and charging
from all private and public AC charging stations. Type-2 AC charging cable
comprise of vehicle charging connector and open cable end wire, for charging
electric vehicles (EV) with alternating current (AC), The connector has an
ergonomic shape, which ensures easy and comfortable handling and connection.
When the cable is connected, it is protected against the ingress of particles
and water. The protective cover has a degree of protection IP55 and protects
against ingress of dust. This open-end cable replacement is to be integrated to
the charging station. You can charge your EV that has Type 2 port. The product
has a nice appearance, a hand-held ergonomic design and is easy to plug.
Specifications | |
Coding | 680 Ω (between PE and PP) |
Connection method | Crimp connection, cannot be disconnected |
Contact Pin | Copper Alloy, Silver Plating |
Contact Resistance | 0.5m ohm Max |
Flame Retardant Grade | UL94 V-0 |
Insulation resistance | >1000Mohm (DC500V) |
Plug Type | Female |
Plug Used At | EV Side |
Power Contact | 5 (L1, L2, L3, N, PE) |
Shell material | ABS and Thermoplastic Material |
Signal Contact | 2 (CP, PP) |
Temperature Resistance | <50K |
Type of signal transmission | Pulse width modulation |
Electrical Properties | |
Charging current (Max) | 16 A |
Charging power | 11 kW |
No Of Phase | Three |
Operating Voltage | 480V |
Rated current Signal Contact | 2A |
Rated voltage Signal Contact | 30 V AC |
Type of charging current | AC single-phase |
Mechanical Properties | |
Impact Insertion Force | >300N |
Insertion force | < 100 N |
Insertion/withdrawal cycles | > 10000 |
Sealing gasket | Rubber or silicon rubber |
Withdrawal force | < 100 N |
Standard & Classifications | |
ETIM | EC002897 |
Standard | IEC 62196-2 |
UNSPSC | 39121500 |
Wiring standard | EN 50620 |
Ambient Properties | |
Operating temperature | -30C to +65C |
Protection Degree | IP55 (Working Condition) |
Cable Properties | |
Cable diameter | 15 mm ±0.4 mm |
Cable Length | 5 Meter |
Cable Outer sheath Material | TPE-U |
Nominal Conductor Size (Sq. mm) | 5 Core x 2.5 Sq. mm 1 Core x 0.5 Sq. mm |