Menu
Your Cart

Welcome to JT Mobility Pvt. Ltd.

India’s first manufacturer of electric vehicle portable chargers and components

Type-1 Portable Electric Car Charger Type 1 SAE J1772 - CEE Plug, Single Phase, 32A, 7kW

Type-1 Portable Electric Car Charger Type 1 SAE J1772 - CEE Plug, Single Phase, 32A, 7kW
Type-1 Portable Electric Car Charger Type 1 SAE J1772 - CEE Plug, Single Phase, 32A, 7kW
Type-1 Portable Electric Car Charger Type 1 SAE J1772 - CEE Plug, Single Phase, 32A, 7kW
Type-1 Portable Electric Car Charger Type 1 SAE J1772 - CEE Plug, Single Phase, 32A, 7kW
Type-1 Portable Electric Car Charger Type 1 SAE J1772 - CEE Plug, Single Phase, 32A, 7kW
Type-1 Portable Electric Car Charger Type 1 SAE J1772 - CEE Plug, Single Phase, 32A, 7kW
Type-1 Portable Electric Car Charger Type 1 SAE J1772 - CEE Plug, Single Phase, 32A, 7kW
Type-1 Portable Electric Car Charger Type 1 SAE J1772 - CEE Plug, Single Phase, 32A, 7kW
Type-1 Portable Electric Car Charger Type 1 SAE J1772 - CEE Plug, Single Phase, 32A, 7kW

Key Features

SAE J1772 Plug, Portable EV Charger, Home Charger 32A, IP66, AC EV Plug, 5m Length.

Designed with AC charging mode for convenient charging of electric vehicles (EV) and electric vehicles supply equipment (EVSE), Charging Everywhere

Charge coupler compliant with SAE J1772

Ergonomic design and impact resistant

Mechanical Lifespan: Over 10,000 mating cycles

Overheating protection mechanism

Over Voltage, Over Current Protection

Earthing Protection

Short Circuit Protection

IP66 ingress protection rating.

Adopt a bright and smooth panel design with built-in LCD Display & LED indicators.

Easy to use.



Data Sheet

  • Model: JTCCM2T1CE1P1A05-2
Ask Question
Request more info

Portable Home EV Charger Type 1 SAE J1772 – CEE Plug, Single Phase, 32A, 7kW

JTCCM2T1CE1P1A05-2

 

JT Mobility Type 1 SAE J1772 Smart portable chargers allow you to charge on the go from all types of sockets, from the usual socket. It can charge all EV manufactured based on Type-1 standard (US), correctly and effectively with high compatibility. Chargers are equipped with protective elements to ensure the complete safety of the car and the charger. TPU sheath cable improves the bending life and wear resistance of cable. The shell can effectively insulate water from body and enhance the safety level even in bad weather or special circumstances. Type-1 SAE J1772 Portable EV Charger features a compact and modularized design to fit various EV interfaces. With an overheating protection mechanism and IP66/CEE enclosure rating for outdoor use, the EV portable charger is a safe and efficient charging solution for EVs. Users will have sufficient protection to avoid the risks of potential fire and electrical shock, and even hand burns due to overheating of the charger. 

Specifications
Application For charging electric vehicles (EV) with AC
BMS Communication YES
Coding 220 Ω (between PE and CS)
Contact Pin Copper Alloy, Silver Plating
Contact Resistance 0.5 megohm MAX
Flame Retardant Grade UL94 V-0
IC-CPD Enclosure Material ABS
IC-CPD LCD Display YES
IC-CPD Standard IEC 62752
Insulation resistance >1000MΩ (DC500V)
Note on the connection method Crimp connection, cannot be disconnected
Over-charge protection YES
Over-discharge protection YES
Over-temperature protection: YES
Plug Type Type-1 Female
Power Contact 3 (L, N, PE)
Product type AC Portable charging cable
Shell material Thermoplastic
Signal Contact 2 (CP, CS)
Soft-start function YES
Supply Connector Type-B (3-Pin)
Temperature Resistance <50K
Type of signal transmission Pulse width modulation
Used at Vehicle Side
Electrical Properties
Charging current (Max) 32A
Charging power Max 7.3kW
Earth leakage detection YES
IC-CPD Operating Voltage 100-250V
IC-CPD Protection Degree IP 66
IC-CPD Rated Current (Max) 32A
No Of Phase Single
Operating Voltage 100-250V
Overcurrent Protection YES
Overvoltage Protection YES
Rated current 32A
Rated current Signal Contact 2A
Rated voltage 250 V
Rated voltage Signal Contact 30 V AC
Short-circuit Protection YES
Type of charging current AC single-phase
Mechanical Properties
Impact Insertion Force: >300N
Insertion force < 100 N
Insertion/withdrawal cycles > 10000
Mating Cycles >10000
Sealing gasket Rubber or silicon rubber
Withdrawal force < 100 N
Standard & Classifications
Standard SAE J1772 Type 1
Wiring standard UL 62
Ambient Properties
Operating Temperature -30C to +65C
Cable Properties
Approx. Diameter Cable (mm) 14.0 ± 0.50
Cable Length 5 Meter
Cable Nominal Conductor Size (Sq. mm) 3 Core x 6 Sq. mm 1 Core x 0.7 Sq. mm
Cable Outer Sheathing Thermoplastic polyurethane (TPU)

    Note: 

    • Please always use this ode 2 EV charging cable for EV with proper inlet socket. Don't use it for EVs with different inlet types.
    • The product is only for EV charging. Please don't use it in any other occasions, including hauling, binding and so on.
    • Don't use it in water.
    • Do not use the charger if any parts of the charger is damaged.
    • Do not use this device with an extension cord or an adapter.
    • The device does not contain any user-serviceable parts.
    • Please do not disconnect the plugs while the EV charger is charging the vehicle.
    • This cable has a precise internal structure. Any questions, please contact sales service at the first time.
    • Mind the risk of electrical shock or burn.
    • The device does not contain any user-serviceable parts. Please don't take it apart without any professional technical support.
    Tags: portable evcharger , ev chargers household , single phase portable chargers , 1phase , electric vehicle chargers , 32a , 32amp ev cables , saej1772 chargers , type1 ev cables , type 1 ev charging cables , ev chargers , fast chargers , electric car , electric car chargers , easy installation , 240v-cables , ev charging , electric vehicle chargers , type 1 chargers
    Allow All Cookies
    We use cookies to collect and analyze information on site performance and usage, to provide social media features and to enhance and customize content and advertisements.