Key Features
Type 2 IEC 62196-2 Male to Type-2 Female, Three Phase, 16 Amp, 11Kw, 5 meter.
Plug in/pull out >10000 times.
It is suitable for Type 2 vehicle inlets and connects charging stations.
Meet IEC 62196-2 standard.
Plug Material: Thermoplastic UL94 V-0,
High Quality Cable Material (TPU/TPE)
Rated with IP55 (working condition).
Pin Material: Copper Alloy & Silver Plating
Waterproof Rating suitable for Indoor and Outdoor Charging Safely.
Non-Flammable Strong Polyamide Material
Data Sheet
- Model: JTCCM3T2T23P1A05-1
EV Charging Cable Mode-3 Type 2 IEC 62196-2 Male to Type 2 IEC 62196-2 Female Three Phase, 16 Amp, 11Kw 5 meter
JTCCM3T2T23P1A05-1
JT Mobility mode 3 charging cable is a connector cable between the charging station and the electric car. To allow electric cars to be charged using type 2 plugs. This cable works on all charging stations mode 3 according to standards ISO 17409 and IEC 61851. It is compatible with all the charging stations and all EV rechargeable vehicle with type 2 standard. This cable will work safely on all charging stations, even the ones with inferior or superior charging power. This product has a unique integrated design and strong structure which can be used outdoor and in rainy environment. It could also withstand the crushing of a vehicle. This Type 2 (Male) – Type 2 (Female) Cable permits three phase 16Amps of charge to flow into the electric vehicle. It used to connect vehicle with EVSE Socket (Female) to Electric Vehicle Inlet Socket (Male)
| Specifications | |
| Coding | 680 Ω (between PE and PP) |
| Connection method | Crimp connection, cannot be disconnected |
| Contact Pin | Copper Alloy, Silver Plating |
| Contact Resistance | 0.5m ohm Max |
| Flame Retardant Grade | UL94 V-0 |
| Insulation resistance | >1000Mohm (DC500V) |
| Plug A End | Type-2 Female EV Side |
| Plug B End | Type-2 Male EVSE Side |
| Plug Type | Female |
| Power Contact | 5 (L1, L2, L3, N, PE) |
| Shell material | ABS and Thermoplastic Material |
| Signal Contact | 2 (CP, PP) |
| Temperature Resistance | <50K |
| Type of signal transmission | Pulse width modulation |
| Electrical Properties | |
| Charging current (Max) | 16 A |
| Charging power | 11 kW |
| No Of Phase | Three |
| Operating Voltage | 480V |
| Rated current Signal Contact | 2A |
| Rated voltage Signal Contact | 30 V AC |
| Type of charging current | AC single-phase |
| Mechanical Properties | |
| Impact Insertion Force | >300N |
| Insertion force | < 100 N |
| Insertion/withdrawal cycles | > 10000 |
| Sealing gasket | Rubber or silicon rubber |
| Withdrawal force | < 100 N |
| Standard & Classifications | |
| ETIM | EC002897 |
| Standard | IEC 62196-2 |
| UNSPSC | 39121500 |
| Wiring standard | EN 50620 |
| Ambient Properties | |
| Operating temperature | -30C to +65C |
| Protection Degree | IP55 (Working Condition) |
| Cable Properties | |
| Cable diameter | 15 mm ±0.4 mm |
| Cable Length | 5 Meter |
| Cable Outer sheath Material | TPE-U |
| Nominal Conductor Size (Sq. mm) | 5 Core x 2.5 Sq. mm 1 Core x 0.5 Sq. mm |
