Key Features
Type
2 IEC 62196-2 Female Inlet Socket for
EVSE
IP55
Rate
Unique
Integrated Design
Mounted
on the side of the vehicle/EVSE.
High
strength flame retardant nylon
Pin
Material: Copper Alloy & Silver Plating
Better
Conductivity and Higher Energy Transmission
Excellent
protection performance resistance to vibration, moisture, dust, and salt spray.
Insulator
in flammability UL94 V-0
Comply
to IEC 62196 standard.
Nice
appearance, hand-held ergonomic design, easy plug
Mechanical
life No-load plug in/pull out >10000 times.
Data Sheet
- Model: JTEVS32A3PT2F
Single/Three
Phase 32A Type 2 IEC 62196-2 Female Inlet Socket for EVSE without Cable
JTEVS32A3PT2F
JT Mobility type 2 inlet socket (female), 32A, 480V, 3-phase. is intended for installation in the charger side for a maximum of 32A. Only to be used in combination with an EVSE (Electric Vehicle Supply Unit) controller. The socket complies a high-quality insulating thermoplastic coating that provides IP55 protection against dust and water ingress from all sides and has a water drainage hole. The socket is ready for 4-point fixing and the screw.
Key
Features
IP55 Rated
Working Condition
Unique
Integrated Design
Self-Cleaning
Function on Pins
Mounted on
the side of the vehicle.
High
strength flame retardant nylon
Pin
Material: Copper Alloy Silver Plating
Better
Conductivity and Higher Energy Transmission
Excellent
protection performance resistance to vibration, moisture, dust, and salt spray.
The socket
is equipped with resistance sensors that automatically switch off when the
temperature rises above a safe limit.
Insulator in
flammability UL94 V-0 (It is equipped with a UL94 V-0 approved fire isolator
that stops the spread of fire within 10 seconds)
Type 2
charging socket meet 62196-2:2010 sheet 2-iia
Comply to EN
62196-1: 2014; EN 62196-2:2017; TUV CE Standards.
Universally
compatible, high-quality IEC 62196 type 2 ev charging outlet designed for
10,000+ charging cycles
Specifications | |
Application | Female socket without Cable (EVSE Side) |
Charging mode | Mode 3, Case B |
Color | Black |
Contact Pin | Copper Alloy, Silver Plating |
Contact Resistance | 0.5m ohm Max |
Depth | 87.95 mm |
Design (charging socket) | Square |
Flame Retardant Grade | UL94 V-0 |
Height | 91.71 mm |
Insulation resistance | >1000Mohm (DC500V) |
Locking type | Locking in the inserted state with a locking mechanism |
Material | Thermoplastic, Flame retardant grade UL94-0; |
Number of Pins | 5 (L1, L2, L3, N, PE) |
Signal Contact | 2 (CP, PP) |
Temperature Resistance | <50K |
Type of cover movement | Self-locking |
Type of signal transmission | Pulse width modulation (PWM) |
Width | 75 mm |
Electrical Properties | |
Charging current (Max) | max. 32 A |
Charging power rating | max. 22 kW |
Rated current | 32A |
Rated current Signal Contact | 2A |
Rated voltage | 480 V AC |
Rated voltage Signal Contact | 30 V AC |
Type of charging current | AC 3-phase |
Mechanical Properties | |
Insertion force | < 100 N |
Insertion/withdrawal cycles | > 10000 |
Sealing gasket | Rubber or silicon rubber |
Withdrawal force | < 100 N |
Standard & Classifications | |
Charging standard | Type 2 |
ETIM | EC002898 |
Standard | IEC 62196-2 |
UNSPSC | 39121800 |
Ambient Properties | |
Operating temperature | -30C to +65C |
Protection Degree | IP55 (Working Condition) |