EV Charging Cable Mode-3 Type 2 IEC 62196-2 Male to Type 2 IEC 62196-2 Female Single Phase, 32 Amp, 7.3Kw 5 meter
JT Mobility mode 3 charging cable is a connector cable between the charging station and the electric car. To allow electric cars to be charged using type 2 plugs. This cable works on all charging stations mode 3 according to standards ISO 17409 and IEC 61851. It is compatible with all the charging stations and all EV rechargeable vehicle with type 2 standard. This cable will work safely on all charging stations, even the ones with inferior or superior charging power. This product has a unique integrated design and strong structure which can be used outdoor and in rainy environment. It could also withstand the crushing of a vehicle. This Type 2 (Male) – Type 2 (Female) Cable permits Single phase 32Amps of charge to flow into the electric vehicle. It used to connect vehicle with EVSE Socket (Female) to Electric Vehicle Inlet Socket (Male)
plug-in process. It could also effectively reduce the generation the electric sparks. The silver plating on the pins makes better conductivity, higher charging efficiency, and effectively reduces heat generation.
The special “self-clean” design. The impurities on the surface of the pins can be removed in each
The plug adopts an advanced integrated design without any screw fixation. The waterproof performance is also higher compared with normal two-piece design or screw –fixed plugs. High safety level can protect the plug against the impacts of the car.
The body design of the plug has a small angle horizontal bending it is in the line with the habit of manual force and more convenient to plug on unplug.
Strong Seamless Construction ensuring a high IP65
Waterproof Rating suitable for Indoor and Outdoor Charging Safely.
Protection V0 Non-Flammable Strong Polyamide Material
We offer a 1 Year Warranty supported by a very experience Technical Support Team.
Suitable for Outdoor and Indoor Charging
Usually 5-meter-long charging cable suitable for electric cars.
It is equipped with Type 2 connectors that operate at charging stations.
Stronger and Anti-Aging
More Environmentally Friendly and Halogen Free
More Resistant to Bending and Longer Service Life
Self-Cleaning Function on Pins
Unique Integrated Design
Better Conductivity and Higher Energy Transmission
Copper Allow, Silver platted pins
|Cable Length||5 Meter|
|Contact Pin||Copper Alloy, Silver or Nickel Plating|
|Contact Resistance||0.5m ohm Max|
|Flame Retardant Grade||UL94 V-0|
|Impact Insertion Force||>300N|
|Insulation resistance||>1000Mohm (DC500V)|
|No Of Phase||Single|
|Nominal Conductor Size (Sq. mm)||3 Core x 6 Sq. mm 2 Core x 0.5 Sq. mm|
|Operating temperature||-30C to +50C|
|Outer Sheathing||15.0 ± 0.50 mm|
|Overall Wrapping||Non-Woven Fabric, 25 % Overlap Min.|
|Plug A End||Type-2 Female EV Side|
|Plug B End||Type-2 Male EVSE Side|
|Protection Degree||IP65 (Working Condition)|
|Sealing gasket||Rubber or silicon rubber|
|Shell material||Thermoplastic ( Insulator inflammability UL94 VO)|