
Description
JT Mobility
mode 3 charging cable is a connector cable between the charging station and the
electric car. To allow electric cars to be charged using type 2 plugs. This
cable works on all charging stations mode 3 according to standards ISO 17409
and IEC 61851. It is compatible with all the charging stations and all EV
rechargeable vehicle with type 2 standard. This cable will work safely on all
charging stations, even the ones with inferior or superior charging power. This
product has a unique integrated design and strong structure which can be used
outdoor and in rainy environment. It could also withstand the crushing of a
vehicle. This Type 2 (Male) – Type 2 (Female) Cable permits Single phase
32Amps of charge to flow into the electric vehicle. It used to connect
vehicle with EVSE Socket (Female) to Electric Vehicle Inlet Socket (Male)
Data Sheet
- Model: JTCCM3T2T21P1A05-2
EV
Charging Cable Mode-3 Type 2 IEC 62196-2 Male to Type 2 IEC 62196-2 Female
Single Phase, 32 Amp, 7.3Kw 5 meter
JTCCM3T2T21P1A05-2
JT Mobility
mode 3 charging cable is a connector cable between the charging station and the
electric car. To allow electric cars to be charged using type 2 plugs. This
cable works on all charging stations mode 3 according to standards ISO 17409
and IEC 61851. It is compatible with all the charging stations and all EV
rechargeable vehicle with type 2 standard. This cable will work safely on all
charging stations, even the ones with inferior or superior charging power. This
product has a unique integrated design and strong structure which can be used
outdoor and in rainy environment. It could also withstand the crushing of a
vehicle. This Type 2 (Male) – Type 2 (Female) Cable permits Single phase
32Amps of charge to flow into the electric vehicle. It used to connect
vehicle with EVSE Socket (Female) to Electric Vehicle Inlet Socket (Male)
Better
Conductivity
plug-in
process. It could also effectively reduce the generation the electric sparks.
The silver plating on the pins makes better conductivity, higher charging
efficiency, and effectively reduces heat generation.
Arcing
Design
The special
“self-clean” design. The impurities on the surface of the pins can be removed
in each
Integrated
Design
The plug
adopts an advanced integrated design without any screw fixation. The waterproof
performance is also higher compared with normal two-piece design or screw
–fixed plugs. High safety level can protect the plug against the impacts of the
car.
Ergonomic
Design
The body
design of the plug has a small angle horizontal bending it is in the line with
the habit of manual force and more convenient to plug on unplug.
Key
Features
Strong
Seamless Construction ensuring a high IP65
Waterproof
Rating suitable for Indoor and Outdoor Charging Safely.
Protection V0
Non-Flammable Strong Polyamide Material
We offer a 1
Year Warranty supported by a very experience Technical Support Team.
Suitable for
Outdoor and Indoor Charging
Usually
5-meter-long charging cable suitable for electric cars.
It is
equipped with Type 2 connectors that operate at charging stations.
TPU Cable
Stronger and
Anti-Aging
More
Environmentally Friendly and Halogen Free
More
Resistant to Bending and Longer Service Life
EV Plug
Self-Cleaning
Function on Pins
Unique
Integrated Design
Better Conductivity
and Higher Energy Transmission
Copper
Allow, Silver platted pins
Specifications | |
Cable Length | 5 Meter |
Contact Pin | Copper Alloy, Silver or Nickel Plating |
Contact Resistance | 0.5m ohm Max |
Flame Retardant Grade | UL94 V-0 |
Impact Insertion Force | >300N |
Insulation resistance | >1000Mohm (DC500V) |
Mating Cycles | >10000 |
No Of Phase | Single |
Nominal Conductor Size (Sq. mm) | 3 Core x 6 Sq. mm 2 Core x 0.5 Sq. mm |
Operating temperature | -30C to +65C |
Operation Voltage | 100-250V |
Outer Sheathing | 15.0 ± 0.50 mm |
Overall Wrapping | Non-Woven Fabric, 25 % Overlap Min. |
Plug A End | Type-2 Female EV Side |
Plug B End | Type-2 Male EVSE Side |
Protection Degree | IP65 (Working Condition) |
Rated current | 32A |
Sealing gasket | Rubber or silicon rubber |
Shell material | Thermoplastic ( Insulator inflammability UL94 VO) |
Standard | IEC 62196-2 |
Temperature Resistance | <50K |