200A Electric Car EV Inlet 1000V DC Combo CCS Type 2 Charging Socket Connector IEC 62196-3 DC male Inlet Socket with 0.5 meter cable and locking actuator
JT Mobility Combined Charging System (CCS) is based on open and universal standards for electric vehicles. The CCS combines single-phase with rapid three-phase charging using alternating current at a maximum of 43 kilowatts (kW), as well as direct-current charging at a maximum of 200 kW and the future perspective of up to 350 kW – all in a single system. The CCS includes the connector and inlet combination as well as all the control functions. It also manages communications between the electric vehicle and the infrastructure. As a result, it provides a solution to all necessary charging requirements.
The Combo CCS2 charging inlet socket are available in 200A. It’s combined alternating current (AC) Type 2 charging and direct current (DC) CCS fast charge in one inlet. With Secure electromagnetic locking actuator, which can lock the charging plug and inlet during the charging process, to avoid accident drop or damage of connectors.
Unique Integrated Design
Self-Cleaning Function on Pins
Mounted on the side of the vehicle.
High strength flame retardant nylon
Pin Material: Copper Alloy Silver Plating
Better Conductivity and Higher Energy Transmission
Excellent protection performance resistance to vibration, moisture, dust, and salt spray.
The socket is equipped with resistance sensors that automatically switch off when the temperature rises above a safe limit.
Insulator in flammability UL94 V-0 (It is equipped with a UL94 V-0 approved fire isolator that stops the spread of fire within 10 seconds)
Conforming to IEC 62196-2 and IEC 62196-3 standards.
Safe against overheating with PT1000 temperature monitoring at every DC power conduct pins.
Protected and sealed against dust and water with a IP55 protection.
Integrated with the AC slow charging and DC fast CCS charging, one charging inlet for all EU standard vehicle.
TUV certified cable, through ozone resistance test, aging test, with good flame retardant oil resistance, low temperature resistance performance.
|125A / 1000V DC Cable||2*35 mm² + 1*25 mm²+ 6*0.75 mm² + 32A: 5*6mm²|
|150A / 1000V DC Cable||2*50 mm² + 1*25 mm²+ 6*0.75 mm² + 32A: 5*6mm²|
|200A / 1000V DC Cable||2*70 mm² + 1*25 mm²+ 6*0.75 mm² + 32A: 5*6mm²|
|60A / 1000V DC Cable||2*16 mm² + 1*16 mm²+ 6*0.75 mm² + 32A: 5*6mm²|
|80A / 1000V DC Cable||2*16 mm² + 1*16 mm²+ 6*0.75 mm² + 32A: 5*6mm²|
|Cable Length||0.5 Meter|
|Conductive terminal||Cooper alloy pins , sliver plated on surface|
|Contact Resistance||0.5m ohm Max|
|Insulation resistance||2000MΩ (DC1000V) for CCS Type 2 charging connector|
|IP protection class||IP 55 (Working condition) protection level, suitable to use in any hard environment condition.|
|Mechanical Parameter||Tested no-load plug in / plug out > 10000 times life cycle|
|Operate force||Less than 100N|
|Operating Temperature||-30C to +50C|
|Operation Voltage||400V MAX|
|Outer Shell||Thermoplastic material, fire rating UL94-0|
|Rated voltage (V DC)||1000V DC|
|Temperature Resistance||< 50K|