Single/Three Phase 32A Type 2 IEC 62196-2 Female Inlet Socket for EVSE with 0.5 Meter cable
JT Mobility type 2 inlet socket (male), 32A, 480V, 3-phase. is intended for installation in the vehicle side for a maximum of 32A. Only to be used in combination with an EVSE (Electric Vehicle Supply Unit) controller. The socket complies a high-quality insulating thermoplastic coating that provides IP65 protection against dust and water ingress from all sides and has a water drainage hole. The socket is ready for 4-point fixing and the screw end is wire-type with 0.5 Meter wire.
IP55 Rated Working Condition
Unique Integrated Design
Self-Cleaning Function on Pins
Mounted on the side of the vehicle.
High strength flame retardant nylon
Pin Material: Copper Alloy Silver Plating
Better Conductivity and Higher Energy Transmission
Excellent protection performance resistance to vibration, moisture, dust, and salt spray.
The socket is equipped with resistance sensors that automatically switch off when the temperature rises above a safe limit.
Insulator in flammability UL94 V-0 (It is equipped with a UL94 V-0 approved fire isolator that stops the spread of fire within 10 seconds)
Type 2 charging socket meet 62196-2:2010 sheet 2-iia
Comply to EN 62196-1: 2014; EN 62196-2:2017; TUV CE Standards.
Universally compatible, high-quality IEC 62196 type 2 ev charging outlet designed for 10,000+ charging cycles
|16A / 250VAC Cable||3*2.5 mm² + 2*0.5 mm²|
|16A / 480VAC Cable||5*2.5 mm² + 2*0.5 mm²|
|32A / 250VAC Cable||3*6 mm² + 2*0.5 mm²|
|32A / 480VAC Cable||5*6 mm² + 2*0.5 mm²|
|Cable Length||0.5 meter|
|Contact Pin||Copper Alloy, Silver or Nickel Plating|
|Contact Resistance||0.5m ohm Max|
|Flame Retardant Grade||UL94 V-0|
|Impact Insertion Force||>300N|
|Insulation resistance||>1000Mohm (DC500V)|
|No Of Phase||Three|
|Number of contacts||7|
|Operating temperature||-30C to +50C|
|Operation Voltage||AC 250V|
|Protection Degree||IP55 (Working Condition)|
|Sealing gasket||Rubber or silicon rubber|