Key Features
Type 2 IEC 62196-2 Female Inlet Socket for EVSE with 0.5 meter cable
IP55 Rated
Unique Integrated Design
Mounted on the side of the vehicle/EVSE.
High strength flame retardant nylon
Pin Material: Copper Alloy & Silver Plating
Better Conductivity and Higher Energy Transmission
Excellent protection performance resistance to vibration, moisture, dust, and salt spray.
Insulator in flammability UL94 V-0
Comply to IEC 62196 standard.
Nice appearance, hand-held ergonomic design, easy plug
Mechanical life No-load plug in/pull out >10000 times.
Data Sheet
- Model: JTEVS32A3PT2FC
Single/Three Phase 32A Type 2 IEC 62196-2 Female Inlet Socket for EVSE with 0.5 Meter cable
JTEVS32A3PT2FC
JT Mobility type 2 socket (Female) is intended for installation in a charging point for a maximum of 3 phase 32A. Only to be used in combination with an EVSE controller. The socket complies a high-quality insulating thermoplastic coating that provides IP55 protection against dust and water ingress from all sides and has a water drainage hole. The socket is ready for 4-point fixing and the screw end is wire-type with 0.5 Meter wire optional.
| Specifications | |
| Application | Female socket with Cable (EVSE Side) |
| Charging mode | Mode 3, Case B |
| Color | Black |
| Contact Pin | Copper Alloy, Silver Plating |
| Contact Resistance | 0.5m ohm Max |
| Depth | 87.95 mm |
| Design (charging socket) | Square |
| Flame Retardant Grade | UL94 V-0 |
| Height | 91.71 mm |
| Insulation resistance | >1000Mohm (DC500V) |
| Locking type | Locking in the inserted state with a locking mechanism |
| Material | Thermoplastic, Flame retardant grade UL94-0; |
| Number of Pins | 5 (L1, L2, L3, N, PE) |
| Signal Contact | 2 (CP, PP) |
| Temperature Resistance | <50K |
| Type of cover movement | Self-locking |
| Type of signal transmission | Pulse width modulation (PWM) |
| Width | 75 mm |
| Electrical Properties | |
| Charging current (Max) | max. 32 A |
| Charging power rating | max. 22 kW |
| Rated current | 32A |
| Rated current Signal Contact | 2A |
| Rated voltage | 480 V AC |
| Rated voltage Signal Contact | 30 V AC |
| Type of charging current | AC 3-phase |
| Mechanical Properties | |
| Insertion force | < 100 N |
| Insertion/withdrawal cycles | > 10000 |
| Sealing gasket | Rubber or silicon rubber |
| Withdrawal force | < 100 N |
| Standard & Classifications | |
| Charging standard | Type 2 |
| ETIM | EC002898 |
| Standard | IEC 62196-2 |
| UNSPSC | 39121800 |
| Ambient Properties | |
| Operating temperature | -30C to +65C |
| Protection Degree | IP55 (Working Condition) |
| Cable Properties | |
| 32A / 480VAC Cable | 5*6 mm² + 2*0.5 mm² |
| Cable Length | 0.5 meter |
