Key Features
CCS Type 2 Charging Cable for DC fast Charger, 150A, 5 meters
Plug in/pull out >10000 times.
Meets 62196-3 IEC 2011 SHEET 3-Im standards.
Rated Voltage: 1000v DC
Material: Thermoplastic UL94 V-0
Rated with IP55 (working condition).
Pin Material: Copper Alloy & Silver Plating
Better Conductivity and Higher Energy Transmission
Nice appearance, hand-held ergonomic design, easy plug
Data Sheet
- Model: JTEVGC2F2-5
150A CCS 2 IEC 62196-3 DC Charging Cable with DC Female EV Plug
JTEVGC2F2-5
JT Mobility DC charging cables are used for fast DC electric vehicle charging. JT Mobility CCS2 EV cables are available in 80A to 200A rating. It’s used in DC fast charging & comply with IEC 62196-3 (EN 62196-3). Combined Charging System (CCS) is based on open and universal standards for electric vehicles. Universally compatible, high-quality CCS2 EV plugs designed for 10,000+ charging cycles. It is Developed and produced in accordance with the IATF 16949 automotive standard.
| Specifications | |
| Application | for charging electric vehicles (EV) with direct current (DC) |
| Case Material | Thermoplastic, Flame retardant grade UL94-0 |
| Charging mode | Mode 4 |
| Coding | 1500 Ω (between PE and PP) |
| Connection method | Crimp connection, cannot be disconnected |
| Contact Pin | Copper Alloy, Silver Plating |
| Contact Resistance | 0.5m ohm Max |
| Coupled insertion force | <100N |
| Flame Retardant Grade | UL94 V-0 |
| Insulation resistance | >1000MΩ (DC1000V) |
| Plug Type | Female |
| Power Contact | 3 (PE, DC+, DC-) |
| Signal Contact | 2 (CP, CS) |
| Technology | Combined Charging System |
| Temperature Resistance | <50K |
| Type of signal transmission | PWM with modulated Powerline communication in accordance with ISO/IEC 15118 / DIN SPEC 70121 |
| Used at | Vehicle |
| Electrical Properties | |
| Charging power | 150 kW |
| Operating Voltage | DC 1000V |
| Rated current | 150A |
| Rated current Signal Contact | 2A |
| Rated voltage Signal Contact | 30 V AC |
| Type of charging current | DC |
| Mechanical Properties | |
| Impact Insertion Force: | >300N |
| Impact of external force | Can afford 1m drop test and 2T vehicle run over pressure |
| Insertion force | < 100 N |
| Insertion/withdrawal cycles | > 10000 |
| Mechanical life | no-load plug in / plug out > 10000 times |
| Sealing gasket | Rubber or silicon rubber |
| Withdrawal force | < 100 N |
| Standard & Classifications | |
| Charging standard | CCS type 2 |
| ETIM | EC002897 |
| Standard | IEC 62196-3 |
| UNSPSC | 39121500 |
| Ambient Properties | |
| IP protection class | IP 55 ( working condition) |
| Operating Temperature | -30C to +65C |
| Temperature monitoring | 2x Pt 1000 |
| Cable Properties | |
| Cable Length | 5 Meter |
| Cable resistance | ≤ 0.000554 Ω/m |
| Cable Standard | EN 50620 |
| Cable structure | 2*50 mm² + 1*25 mm²+ 6*0.75 mm² + 32A: 5*6mm² |
| External cable diameter | 28 mm ±0.5 mm |
| Outer Sheathing Material | TPE-U |
