Key Features
IEC
62196-2 Plug, Portable EV Charger, Home Charger 16A, IP66, AC, EV Plug, 5m
Length
Designed
with AC charging mode for convenient charging of electric vehicles (EV) and
electric vehicles supply equipment (EVSE), Charging Everywhere
Charge
coupler compliant with IEC 62196-2
Ergonomic
design and impact resistant
Mechanical
Lifespan: Over 10,000 mating cycles
Overheating
protection mechanism
Over Voltage, Over Current Protection
Earthing Protection
Short
Circuit Protection
IP66 ingress protection rating.
Adopt
a bright and smooth panel design with built-in LCD display and LED indicators.
Easy to use.
Data Sheet
- Model: JTCCM2T2CE1P1A05-2
Portable EV Home Charger Type 2 IEC 62196-2 - CEE, Single Phase, 32A, 7.3kW
JTCCM2T2CE1P1A05-2
JT Mobility Type 2 IEC 62196-2 Smart portable chargers allow you to charge on the go from all types of sockets, from the usual socket. It can charge all EV manufactured based on Type-2 standard (Europe/India), correctly and effectively with high compatibility. Chargers are equipped with protective elements to ensure the complete safety of the car and the charger. TPU sheath cable improves the bending life and wear resistance of cable. The shell can effectively insulate water from body and enhance the safety level even in bad weather or special circumstances. Type-2 IEC 62196-2 Portable EV Charger features a compact and modularized design to fit various EV interfaces. With an overheating protection mechanism and IP66/CEE enclosure rating for outdoor use, the EV portable charger is a safe and efficient charging solution for EVs. Users will have sufficient protection to avoid the risks of potential fire and electrical shock, and even hand burns due to overheating of the charger.
Specifications | |
Application | For charging electric vehicles (EV) with AC |
BMS Communication | YES |
Coding | 220 Ω (between PE and PP) |
Contact Pin | Copper Alloy, Silver Plating |
Contact Resistance | 0.5 megohm MAX |
Flame Retardant Grade | UL94 V-0 |
IC-CPD Enclosure Material | ABS |
IC-CPD LCD Display | YES |
IC-CPD Standard | IEC 62752 |
Insulation resistance | >1000MΩ (DC500V) |
Note on the connection method | Crimp connection, cannot be disconnected |
Over-charge protection | YES |
Over-discharge protection | YES |
Over-temperature protection: | YES |
Plug Type | Type-2 Female |
Power Contact | 3 (L, N, PE) |
Product type | AC Portable charging cable |
Shell material | Thermoplastic |
Signal Contact | 2 (CP, PP) |
Soft-start function | YES |
Supply Connector | CEE (Industrial 3-Pin Plug) |
Temperature Resistance | <50K |
Type of signal transmission | Pulse width modulation |
Used at | Vehicle Side |
Electrical Properties | |
Charging current (Max) | 32A |
Charging power | Max 7.3kW |
Earth leakage detection | YES |
IC-CPD Operating Voltage | 100-250V |
IC-CPD Protection Degree | IP 66 |
IC-CPD Rated Current (Max) | 32A |
No Of Phase | Single |
Operating Voltage | 100-250V |
Overcurrent Protection | YES |
Overvoltage Protection | YES |
Rated current | 32A |
Rated current Signal Contact | 2A |
Rated voltage | 250 V |
Rated voltage Signal Contact | 30 V AC |
Short-circuit Protection | YES |
Type of charging current | AC single-phase |
Mechanical Properties | |
Impact Insertion Force: | >300N |
Insertion force | < 100 N |
Insertion/withdrawal cycles | > 10000 |
Mating Cycles | >10000 |
Sealing gasket | Rubber or silicon rubber |
Withdrawal force | < 100 N |
Standard & Classifications | |
Comply to AIS- 038 (Rev. 2) | YES |
Comply to IEC 61851-21-2 | YES |
Comply to IS 17017 (Part 21/Sec 2) | YES |
Standard | IEC 62196-2 (Type-2) |
Wiring standard | EN 50620 |
Ambient Properties | |
Operating Temperature | -30C to +65C |
Cable Properties | |
Approx. Diameter Cable (mm) | 14.0 ± 0.50 |
Cable Length | 5 Meter |
Cable Nominal Conductor Size (Sq. mm) | 3 Core x 6 Sq. mm 1 Core x 0.7 Sq. mm |
Cable Outer Sheathing | Thermoplastic polyurethane (TPU) |
Note:
- Please always use this ode
2 EV charging cable for EV with proper inlet socket. Don't use it for EVs
with different inlet types.
- The product is only for EV
charging. Please don't use it in any other occasions, including hauling,
binding and so on.
- Don't use it in water.
- Do not use the charger if
any parts of the charger is damaged.
- Do not use this device with
an extension cord or an adapter.
- The device does not contain
any user-serviceable parts.
- Please do not disconnect the
plugs while the EV charger is charging the vehicle.
- This cable has a precise
internal structure. Any questions, please contact sales service at the
first time.
- Mind the risk of electrical
shock or burn.
- The device does not contain
any user-serviceable parts. Please don't take it apart without any
professional technical support.