Key Features
Type 1 SAE J1772 Female Single-Phase Cable, Single Phase, 32 Amp, 7Kw, 5 meter
Plug in/pull out >10000 times.
It is suitable for Type 1 vehicle inlets and connects charging stations.
Meet SAE J1772 standard.
Plug Material: Thermoplastic UL94 V-0,
High grade Cable Material TPU/TPE
Rated with IP55 (working condition).
Pin Material: Copper Alloy & Silver Plating
Nice appearance, hand-held ergonomic design, easy plug
Data Sheet
- Model: JTCCM3T11P1A05-2
Mode 3 Tethered Charging Cable Type 1 SAE J1772 Female Single Phase 32 Amp 7.3Kw 5 Meter
JTCCM3T11P1A05-2
JT Mobility Single Phase 16A/32A Type-1 tethered charging cable is designed for charging in mode 3, it is suitable for connection and charging from all private and public AC stations. SAE J1772 Single Phase AC Type 1 Female electric car plug is designed to create a custom EV charger by selecting the desired cable length and connectors. Our This type1 connector meet the US standards. The connector has an ergonomic shape, which ensures easy and comfortable handling and connection. When the cable is connected, it is protected against the ingress of particles and water. The protective cover has a degree of protection IP55 and protects against ingress of dust. This open-end cable replacement is to be integrated to the charging station. You can charge your EV that has Type 1 port. The product has a nice appearance, a hand-held ergonomic design and is easy to plug.
| Specifications | |
| Application | for charging electric vehicles (EV) with alternating current (AC) via type 1 vehicle charging inlets |
| Coding | 220 Ω (between PE and CS) |
| Contact Pin | Copper Alloy, Silver Plating |
| Contact Resistance | 0.5m ohm Max |
| Flame Retardant Grade | UL94 V-0 |
| Insulation resistance | >1000Mohm (DC500V) |
| Note on the connection method | Crimp connection, cannot be disconnected |
| Open End Thread | Charging Station |
| Plug Type | Type-1 Female |
| Power Contact | 3 (L, N, PE) |
| Product type | AC charging cable |
| Shell material | Thermoplastic ( Insulator inflammability UL94 VO) |
| Signal Contact | 2 (CP, CS) |
| Temperature Resistance | <50K |
| Type of signal transmission | Pulse width modulation |
| Used at | Vehicle Side |
| Electrical Properties | |
| Charging current (Max) | 32 A |
| Charging power | 8 kW |
| No Of Phase | AC Single Phase |
| Operating Voltage | 100-250V |
| Rated current | 32A |
| Rated current Signal Contact | 2A |
| Rated voltage | 250 V |
| Rated voltage Signal Contact | 30 V AC |
| Type of charging current | AC single-phase |
| Mechanical Properties | |
| Impact Insertion Force | >300N |
| Insertion force | < 100 N |
| Insertion/withdrawal cycles | > 10000 |
| Mating Cycles | >10000 |
| Sealing gasket | Rubber or silicon rubber |
| Withdrawal force | < 100 N |
| Standard & Classifications | |
| ETIM | EC002897 |
| Standard | SAE J1772 |
| UNSPSC | 39121500 |
| Wiring standard | UL 62 |
| Ambient Properties | |
| Operating temperature | -30C to +65C |
| Protection Degree | IP55 (Working Condition) |
| Cable Properties | |
| Cable Length | 5 Meter |
| Cable Outer sheath Material | TPE-U |
| Cable resistance | ≤ 0.0033 Ω/m |
| Nominal Conductor Size (Sq. mm) | 3 Core x 6 Sq. mm 1 Core x 0.7 Sq. mm |
| Outer Sheathing | 14.0 ± 0.50 mm |
