Key Features
Type
1 SAE J1772 Female Single-Phase Cable, Single Phase, 48 Amp, 12Kw, 5 meters
Plug
in/pull out >10000 times.
It
is suitable for Type 1 vehicle inlets and connects charging stations.
Meet
SAE J1772 standard.
Plug
Material: Thermoplastic UL94 V-0,
High
grade Cable Material TPU/TPE
Rated
with IP55 (working condition).
Pin
Material: Copper Alloy & Silver Plating
Nice
appearance, hand-held ergonomic design, easy plug
Data Sheet
- Model: JTCCM3T11P1A05-4
Mode 3
Tethered Charging Cable Type 1
SAE J1772 Female Single Phase 48 Amp 12Kw 5 Meter
JTCCM3T11P1A05-4
JT
Mobility Single Phase 16A/32A Type-1 tethered charging cable is designed for
charging in mode 3, it is suitable for connection and charging from all private
and public AC stations. SAE J1772 Single Phase AC Type 1 Female electric car
plug is designed to create a custom EV charger by selecting the desired cable
length and connectors. Our This type1 connector meet the US standards. The
connector has an ergonomic shape, which ensures easy and comfortable handling
and connection. When the cable is connected, it is protected against the
ingress of particles and water. The protective cover has a degree of protection
IP55 and protects against ingress of dust. This open-end cable replacement is
to be integrated to the charging station. You can charge your EV that has Type
1 port. The product has a nice appearance, a hand-held ergonomic design and is
easy to plug.
Specifications | |
Application | for charging electric vehicles (EV) with alternating current (AC) via type 1 vehicle charging inlets |
Coding | 220 Ω (between PE and CS) |
Contact Pin | Copper Alloy, Silver Plating |
Contact Resistance | 0.5m ohm Max |
Flame Retardant Grade | UL94 V-0 |
Insulation resistance | >1000Mohm (DC500V) |
Note on the connection method | Crimp connection, cannot be disconnected |
Open End Thread | Charging Station |
Plug Type | Type-1 Female |
Power Contact | 3 (L, N, PE) |
Product type | AC charging cable |
Shell material | Thermoplastic ( Insulator inflammability UL94 VO) |
Signal Contact | 2 (CP, CS) |
Temperature Resistance | <50K |
Type of signal transmission | Pulse width modulation |
Used at | Vehicle Side |
Electrical Properties | |
Charging current (Max) | 48A |
Charging power | 12 kW |
No Of Phase | AC Single Phase |
Operating Voltage | 100-250V |
Rated current | 48A |
Rated current Signal Contact | 2A |
Rated voltage | 250 V |
Rated voltage Signal Contact | 30 V AC |
Type of charging current | AC single-phase |
Mechanical Properties | |
Impact Insertion Force | >300N |
Insertion force | < 100 N |
Insertion/withdrawal cycles | > 10000 |
Mating Cycles | >10000 |
Sealing gasket | Rubber or silicon rubber |
Withdrawal force | < 100 N |
Standard & Classifications | |
ETIM | EC002897 |
Standard | SAE J1772 |
UNSPSC | 39121500 |
Wiring standard | UL 62 |
Ambient Properties | |
Operating temperature | -30C to +65C |
Protection Degree | IP55 (Working Condition) |
Cable Properties | |
Cable Length | 5 Meter |
Cable Outer sheath Material | TPE-U |
Cable resistance | ≤ 0.001025 Ω/m |
Nominal Conductor Size (Sq. mm) | 3 Core x 6 Sq. mm 2 Core x 0.7 Sq. mm |
Outer Sheathing | 15 ± 0.50 mm |