
Description
JT Mobility
type 2 inlet socket (male), 32A, 480V, 3-phase. is intended for installation in
the vehicle side for a maximum of 32A. Only to be used in combination with an
EVSE (Electric Vehicle Supply Unit) controller. The socket complies a
high-quality insulating thermoplastic coating that provides IP65 protection
against dust and water ingress from all sides and has a water drainage hole.
The socket is ready for 4-point fixing and the screw.
Data Sheet
- Model: JTEVS32A3PT2F
Single/Three
Phase 32A Type 2 IEC 62196-2 Female Inlet Socket for EVSE without Cable
JTEVS32A3PT2F
JT Mobility
type 2 inlet socket (male), 32A, 480V, 3-phase. is intended for installation in
the vehicle side for a maximum of 32A. Only to be used in combination with an
EVSE (Electric Vehicle Supply Unit) controller. The socket complies a
high-quality insulating thermoplastic coating that provides IP65 protection
against dust and water ingress from all sides and has a water drainage hole.
The socket is ready for 4-point fixing and the screw.
Key
Features
IP55 Rated
Working Condition
Unique
Integrated Design
Self-Cleaning
Function on Pins
Mounted on
the side of the vehicle.
High
strength flame retardant nylon
Pin
Material: Copper Alloy Silver Plating
Better
Conductivity and Higher Energy Transmission
Excellent
protection performance resistance to vibration, moisture, dust, and salt spray.
The socket
is equipped with resistance sensors that automatically switch off when the
temperature rises above a safe limit.
Insulator in
flammability UL94 V-0 (It is equipped with a UL94 V-0 approved fire isolator
that stops the spread of fire within 10 seconds)
Type 2
charging socket meet 62196-2:2010 sheet 2-iia
Comply to EN
62196-1: 2014; EN 62196-2:2017; TUV CE Standards.
Universally
compatible, high-quality IEC 62196 type 2 ev charging outlet designed for
10,000+ charging cycles
Specifications | |
Contact Pin | Copper Alloy, Silver or Nickel Plating |
Contact Resistance | 0.5m ohm Max |
Flame Retardant Grade | UL94 V-0 |
Impact Insertion Force | >300N |
Insulation resistance | >1000Mohm (DC500V) |
No Of Phase | Three |
Number of contacts | 7 |
Operating temperature | -30C to +65C |
Operation Voltage | AC 250V |
Protection Degree | IP55 (Working Condition) |
Rated current | 32A |
Sealing gasket | Rubber or silicon rubber |
Shell material | Thermoplastic |
Standard | IEC 62196-2 |
Temperature Resistance | <50K |
Audi Electric Vehicles
BMW Electric Vehicles
MG Electric Vehicles
Tata Electric Vehicles
Hyundai Electric Vehicles
Jaguar Electric Vehicles
Kia Electric Vehicles
LEVC Electric Vehicles
Mercedes Electric Vehicles
MG Electric Vehicles
Mini Electric Vehicles
Nissan Electric Vehicles
Porsche Electric Vehicles
Range Rover Electric Vehicles
Renault Electric Vehicles
Rimac Electric Vehicles
Smart Electric Vehicles
Tesla Electric Vehicles
Volkswagen Electric Vehicles
Volvo Electric Vehicles
Toyota Electric Vehicles
Maruti Electric Vehicles