Single/Three Phase 32A Type 2 IEC 62196-2 male Inlet Socket for EV with 0.5 meter cable
JT Mobility Type 2 inlet socket (male), 32A, 250V, three phase is intended for installation in the vehicle side for a maximum of 32A. The socket complies a high-quality insulating thermoplastic coating that provides IP55 protection against dust and water ingress from all sides and has a water drainage hole. The socket is ready for 4-point fixing and the screw and 0.5 Meter cable at another end.
Unique Integrated Design
Self-Cleaning Function on Pins
Mounted on the side of the vehicle.
High strength flame retardant nylon
Pin Material: Copper Alloy Silver Plating
Better Conductivity and Higher Energy Transmission
Excellent protection performance resistance to vibration, moisture, dust, and salt spray.
The socket is equipped with resistance sensors that automatically switch off when the temperature rises above a safe limit.
Insulator in flammability UL94 V-0 (It is equipped with a UL94 V-0 approved fire isolator that stops the spread of fire within 10 seconds)
Meet 62196-2 IEC 2010 SHEET 2-IIe standard
Nice appearance, hand-held ergonomic design, easy plug
Mechanical life：No-load plug in/pull out >10000 times
|16A / 250VAC Cable||3*2.5 mm² + 2*0.5 mm²|
|16A / 480VAC Cable||5*2.5 mm² + 2*0.5 mm²|
|32A / 250VAC Cable||3*6 mm² + 2*0.5 mm²|
|32A / 480VAC Cable||5*6 mm² + 2*0.5 mm²|
|Cable Length||0.5 meter|
|Contact Pin||Copper Alloy, Silver or Nickel Plating|
|Contact Resistance||0.5m ohm Max|
|Flame Retardant Grade||UL94 V-0|
|Impact Insertion Force||>300N|
|Insulation resistance||>1000Mohm (DC500V)|
|No Of Phase||Three|
|Number of contacts||7|
|Operating temperature||-30C to +50C|
|Operation Voltage||AC 250V|
|Protection Degree||IP55 (Working Condition)|
|Sealing gasket||Rubber or silicon rubber|