Key Features
Type 2 IEC 62196-2 Female 16A Three Phase EV Plug
Plug in/pull out >10000 times.
Comply to IEC 62196-1: 2014; IEC 62196-2:2017; CE Standards.
Body is made with High Grade ABS and Thermoplastic Material
Rated with IP55 (working condition).
Anti-flaming, pressure-resistant, impact resistance material
Pin Material: Copper Alloy & Silver Plating
Better Conductivity and Higher Energy Transmission
Nice appearance, hand-held ergonomic design, easy plug
Available in Single phase and 3 Phase configuration
Assembly includes Pins, Cable Gland, Cable Clamp, Body, and Resistor
Data Sheet
- Model: JTEVG3PT2F-1
Type 2 IEC 62196-1 Female 16A Three Phase EV Plug or Connector Gun
JTEVG3PT2F-1
JT Mobility Type 2 AC Female electric car plug is designed to create a custom EV charger by selecting the desired cable length and connectors. The connector is compiled to IEC 62196-2 standard. EV Connector gun comes as a component including the correct resistance required for assembly. This is not a complete charging cable; you use the components offered here to mount a complete charging cable type 2 for self-assembly. This type 2 female plug with 16A/32A single / Three phase cable is suitable for self-built Mode 2 & Mode 3 charging cables.
| Specifications | |
| Coding | 1500 Ω (between PE and PP) |
| Connection method | Crimp connection, cannot be disconnected |
| Contact Pin | Copper Alloy, Silver Plating |
| Contact Resistance | 0.5m ohm Max |
| Flame Retardant Grade | UL94 V-0 |
| Insulation resistance | >1000Mohm (DC500V) |
| Plug Type | Female |
| Plug Used At | EV Side |
| Power Contact | 5 (L1, L2,L3, N, PE) |
| Shell material | ABS and Thermoplastic Material |
| Signal Contact | 2 (CP, PP) |
| Temperature Resistance | <50K |
| Type of signal transmission | Pulse width modulation |
| Electrical Properties | |
| Charging current (Max) | 16 A |
| Charging power | 11 kW |
| No Of Phase | Three |
| Operating Voltage | 480V |
| Rated current Signal Contact | 2A |
| Rated voltage Signal Contact | 30 V AC |
| Type of charging current | AC Three-phase |
| Mechanical Properties | |
| Impact Insertion Force | >300N |
| Insertion force | < 100 N |
| Insertion/withdrawal cycles | > 10000 |
| Sealing gasket | Rubber or silicon rubber |
| Withdrawal force | < 100 N |
| Standard & Classifications | |
| ETIM | EC002897 |
| Standard | IEC 62196-2 |
| UNSPSC | 39121500 |
| Ambient Properties | |
| Operating temperature | -30C to +65C |
| Protection Degree | IP55 (Working Condition) |
